Control of 1 pump/valve between 2 levels fixed by length of electrodes.
Control of 1 pump/valve between 2 levels fixed by length of electrodes.
Using a fixed probe system means there are no moving parts to jam or go wrong.
Cut the electrodes at the point where you want something to happen
If there is any insulation on the electrodes strip back about 50 mm ( 2 inches) and expose the bare metal underneath.
Ensure you have an earth return. This can be the metal tank or the submersed pump or another electrode. If using an earth electrode it must always be the longest electrode in the tank. But it only needs to be slightly longer than the next electrode.
Remember to use the Hawker level controller which is the brains to make a repeatable reliable system.It is designed to ignore electrode contamination.
If you would like to see a video clip about the controller's ability to ignore ragging then follow this link http://www.youtube.com/watch?v=63z8LmPD4ks and if you would like to see a video clip about the controller's ability to ignore foam then follow this link
http://www.youtube.com/watch?v=Z9URP0B-4I8
Navigation
Featured Products
Flexilevel 3 FXL3 controller
FXL3 Flexilevel 3 indication/controller ...
P8/IS Intrinsically Safe Conductivity Level Controller
ATEX, UKEX and IECEx certified (to Zone ...
MiniSonda Ultrasonic transmitter
MiniSonda ultrasonic transmitter This...
990 Signal Conditioner
Signal Instrument. Internal simulator in...
Flexicap FXL3
Flexilevel 3 controller/Indicator c/w 5 ...
Auto Pump Priming System, APP-C & APP-P
APP-C & APP-P automatic smart pump primi...
Controller with cable monitoring
SCFA2 Single Channel Flood Alarm ...
